LUBING online

Floor-Watering System For Turkeys

Perfect water supply for turkeys

The central element of the floor-watering system for turkeys is the turkey nipple Art. 4070. The drinking system gets optimised with the pendulum and the cups for rearing and fattening for every age of the turkey.

The principle of the pendulum

The pendulum gets directed with the head of the animal at every absorption of water. The valve in the turkey nipple opens and water flows out of the 28 mm square pipe from the inside of the pendulum into the cup.

At every drinking procedure the edge of the cub gets clean with the help of the jowl and the feathering of the birds (sea lower picture).

Therefore the optimal height for the animals is necessary.

Please choose an elements:

Elements:

The LUBING Floor-Watering System consists of the following elements:

1. Water Supply
2. Drinking Elements
3. Breather Unit
4. Suspension

1. Water supply: The main water supply secures an optimal water quality for a long service life of nipple drinkers. The water should have the quality of drinking water. At any case the water must get filtered. The water supply occurs with the help of the main water supply trough the pressure regulator with integrated flush system. This version is available for the front- or the middle-connection.

2. Drinking elements: The drinking lines are supplied pre-assembled in 3 m long elements. These are coupled together to the length of the house.

3. Breather unit: At the end of each drinking line it is alternatively possible to mount a breather revolving unit or a flush breather, that contains an automatic flushsystem.

4. Suspension: The suspension of the drinking lines is supplied via hangers, which are stuck on the aluminium profiles every 3 m. These steel wire hangers are connected with the suspension cables via ceiling pulleys with the central hoisting cable. Then the drinking line can be adjusted to the desired height by the hand – or it can be winched up easily to the ceiling for emptying or cleaning

Main facts at a glance

Recommended number of birds per nipple*:

Rearing:

30-40 birds/Nipple

Tom finishing:

approx 20 birds/Nipple

Hen finishing:

25-30 birds per nipple:

* The number of birds per nipple has to be reduced in hot climate zones and in dependence of light/water programme. Pay attention to national/regional regulations!

Versions of 3m-elements:

Rearing or hen finishing:

Tom finishing:

Art. 4084 3 drinkers/element Art. 4087:

3 drinkers/element
(thereof 1 without pendulum)

Art. 4085 4 drinkers/element Art. 4088:

4 drinkers/element
(thereof 1 without pendulum)

Art. 4086 5 drinkers/element Art. 4088:

5 drinkers/element
(thereof 1 without pendulum)

Layout :

Turkey rearing:

2 drinking lines in the ring preferably in major distance from heater

Hen finishing:

1 drinking line per food channel

Tom finishing:

1 drinking line per food channel

	front connection	max. length of lines	middle connection	max. length of line
Pressure regulator	Art. 3201-00	60**	Art. 3216-00	bis120**
** While using the light-/waterprogramme the length of line has to be reduced by 1/3.

Gefälle
LUBING shocker wire for main fencer.s.
Druckminderer
The LUBING ball tank as well as the pressure regulator can also be installed in the middle of a water line according to the house conditions..

Download PDF "Floor-watering system for Turkeys"